LIFT-O-MAT Gas Springs for Industrial Applications

Wherever a folding or turning motion needs to be held safely in the end position, the LIFT-O-MAT gas spring with hydraulic motion damping is the right choice.

It will prevent unbraked force application to hinges or joints, saving the material from wear and tear. The entire motion sequence will become more harmonic and controlled overall.

Function

The hydraulically dampened LIFT-O-MAT has an extra oil chamber. As soon as the piston leaves the gas range and enters the oil, its speed will be reduced. The degree of damping is determined by the use of patented Labyrinth pistons, as well as by the viscosity of the oil. The oil amount used will define the damping range.

To dampen extension, the gas spring is installed vertically with the piston rod down. In situations where additional compression damping is needed, there are standard models that can be installed vertically with the piston rod pointing up.

Furniture gas springs from Stabilus combine high-end functionality with an attractive design and the comfort that comes with it.

They open flaps and lids without effort, hold them securely in place, and also make sure that they close softly and quietly. They are very easy to mount, maintenance-free, attractive, and reasonably priced.

Variable Tilt Adjustment without Actuation Mechanism

The HYDRO-LIFT gas spring provides force assist and allows variable, comfortable positioning of the application at any tilt angle.

With rigid locking, the HYDRO-LIFT gas spring can even handle weight fluctuations between defined limits, for example due to varying loads. Another advantage is that no actuation mechanism is required for adjustment.

Function

The HYDRO-LIFT from Stabilus is a gas spring featuring a special piston package with a valve closing system, which – in addition to force assist – allows progressive positioning over the entire adjustment range. Depending on the design, the hold function can be active across the entire adjustment range, or in one or more partial ranges of the stroke.

Unlike the gas-filled version, the oil-filled spring features rigid locking and can be switched into the compression direction. It is preferred for very light loads. In this version, the light spring deflection is eliminated.

Gas Spring for Stop in the Compressed Position

The LIFT-O-MAT PTL gas spring with self-stop function (ballpoint pen principle) has stood the test of time in modern, innovative designer and functional furniture numerous times.

In the compressed position, the gas spring is held by a locking system which will extend noiselessly upon a gentle push on the gas spring.

Function

The LIFT-O-MAT PTL from Stabilus is a gas spring with an additional mechanical lock in the compressed position.

Similar to the ball point pen principle, the lock can be released by a light push; the gas spring will then extend automatically. In addition to the force assist function, this gas spring features an end position lock eliminating the need for additional fixing elements.

At the same time, LIFT-O-MAT PTL is easy and convenient to use.

The larger the lid, the more unpleasant the consequences if it should start moving on its own and fall shut.

In addition to force assist, the LIFT-O-MAT gas spring with end position lock also provides a safe mechanical lock of the application in the open position.

Function

The gas spring with the lock on the outside features a support tube at the end of the piston rod that folds out automatically when the gas spring is fully extended. During closing, the support tube must be folded down by hand.

The LIFT-O-MAT gas spring with dynamic damping from Stabilus works regardless of its mounting orientation, thus approaching any position comfortably, without stressing hinges and joints.

With dynamic compression damping, this LIFT-O-MAT is particularly well suited for engine hoods and lids where the piston rod swivels from top to bottom. Upon closing, the hood or lid will be dampened gently, reducing wear on the material.

Function

With a special longitudinal groove inside the pressure tube, the damping properties can be influenced as needed and thus customized to almost any application. The controlled approach of intermediate positions is also possible.

By reducing or increasing the groove cross-section, the speed of motion can be varied over the entire stroke and continuously slowed down to the stopping point.

Variable Positioning over the Entire Adjustment Range

The LIFT-O-MAT FR gas pressure spring combines ergonomic requirements with the highest level of functionality and space-saving design.

In addition to providing force assist, it allows variable positioning over the entire adjustment range, without using a lock or an actuation mechanism. The advantage is that doors that swing upward can be reached and closed more easily also by shorter persons. Because of its comfortable, variable positioning characteristics, the LIFT-O-MAT FR gas spring is frequently used in free-moving brackets.

Function

The only difference between the LIFT-O-MAT FR and the standard LIFT-O-MAT is a special piston package with an integrated friction element. In addition to force assist, this allows variable holding over the entire adjustment range. Operation of a lock or actuation mechanism is not required. Even weight fluctuations between defined limits, for example due to varying loads, can be offset.

Dynamically Dampened Gas Spring with Hold Function

The INTER-STOP allows variable positioning of lids, doors, or windows at different opening angles.

Function

The INTER-STOP from Stabilus is a dynamically dampened gas spring with the additional holding force of the HYDRO-LIFT in the extension direction. It can be divided into two or more function areas and provides different opening options.

In one range, the gas spring will extend freely with force assist and then softly stop at a defined point.

In a second range with holding function, the gas spring can be stopped variably. There it can hold the load of the application in any intermediate position up to the end stop, until manually pushed into a new holding position.

The compression function of the gas spring is the same as in a standard LIFT-O-MAT.

Corrosion Protection for Very Demanding Applications

When it comes to resisting environmental effects, this stainless steel gas spring stands out due to its functionality and attractive appearance – and that for many years.

The special characteristics of the LIFT-O-MAT Inox Line ensure a high level of protection against acid or lye exposure, or when used in a critical environmental, such as corrosive sea water or industrial air.

Function and Properties

The LIFT-O-MAT INOX combines the compact design and functionality of a Stabilus gas pressure spring with the special material properties of stainless steel. The non-rusting V4A stainless steel pursuant to DIN EN 100 88-1 makes this gas spring particularly corrosion-resistant and is consequently suited for use in shipyards or the chemical industry.

Carefully chosen materials for the components yield a virtually iron-free product that will barely interfere with magnetic fields, such as they occur in medical or defense technology.

The INOX line gas springs only use environmentally friendly oils that are biodegradable and classified as no hazard to water.

The larger the lid, the more unpleasant the consequences if it should start moving on its own and fall shut.

In addition to force assist, the LIFT-O-MAT gas spring with end position lock also provides a safe mechanical lock of the application in the open position.

Function

The locking of a gas spring with the lock on the inside is comparable to the mechanics of a ball point pen: when the gas spring is pushed in lightly, it will catch. If pushed briefly in the extension direction, the locking mechanism will be released.

Zinc plated steel brackets

Our brackets ensure safe installation in the most diverse industrial applications. They match our standard end fittings and were specifically designed to high load and corrosion resistance specifications. Each model features an elongated fixation hole to allow correction during installation. Our large selection covers most application needs.

Angle joint made of metal with or without ball pivots

This angle joint is a high-quality and sturdy variant in our line of end fittings. Due to its high strength, it is especially suited for applications where high forces occur, providing the necessary convenience. What is special about the angle joint is its ease of installation, and that it can also compensate for angle offset. That means, in applications where the gas spring is installed slightly out of plumb, the angle joint will offset the resulting angle.

Angle joint made of plastic with or without ball pivots

The plastic angle joint is an inexpensive variant of the angle joint.  Also very easy to install and, like the metal joint, it will compensate for angle offset. The plastic variant is especially suited for applications in which light loads will be moved.

Metal eyes

Our metal eyes are also used as end fittings. Due to their high strength and in the various lengths, thicknesses and diameters available, they are extremely flexible.

Stainless steel eye

Stainless steel eyes have the same functionality as eyes made from metal. The high-quality properties of stainless steel provide additional corrosion protection when exposed to acid and lye or in critical environments, such as sea or industrial air.

Fork head made of metal

Should extremely high forces or weights occur in an application, the fork head will be the safest variant. Due to its high-strength connection, which is additionally supported by a metal pin, it can safely move high loads.

Ball joint

With this special ball joint, Stabilus is making  the installation of gas springs in cars easier. Only a punched-out hole is required for assembly; weld-on ball pivots or angled plates will no longer be necessary.